Jin's lecture continues.

"...... and thus the is the most suitable when it comes to automata, but it has one major drawback.

Everyone seemed to understand this and waited for Jin's words.

"It is that it is . In this case, the cost includes , etc."

None of these are of much relevance to Jin, but in general they are not.

"Rather than ...... to solve this problem, it was developed to reduce the cost, which is now the mainstream of golem production <>, isn't it?"

Most of the technicians nodded silently.

"Well, now, I said that it was not a <> but a <>. Let me explain the difference.

Jin then explains that the spherical joint type is indeed low cost and suitable for mass production,

"However, there are some problems in terms of movement.

He then explained that it is not suitable for making <> movements.

Please open to page 6 or 7.

There were diagrams of the <> and <>.

"As this is an introduction, I will briefly review how the human body works, as some of you may know. ......"

And so the first part of Jin's lecture <> ended without a hitch.

<

During this 10-minute break, you will drink water and go to the restroom.

"Okay, first one, I'm done."

"Thank you, Jin-sama, for your hard work."

Marikka helped Jin.

"I'm glad to see that no one is uncomfortable with the word 'Adriana's method'.

"Yes, that's because the previous Jin-sama did a lot of work to make sure that the < was well known."

Jin wanted people to know that it was his predecessor who created and perfected the foundation of automata.

"......Yes, I would do that."

"Yes, I would."

Jin smiled and relaxed his shoulders.

Marikka is next. I'm going to ask you right here.

"I'm nervous when I think Jin-sama is listening to me. ......"

* * * *

<>. Marikka-sama of Shinra, please.

Now Marikka took the podium.

"Nice to meet you all, newcomers. To those of you who know me, it's been a long time. <

Marikka's greeting was so familiar that Jin was surprised.

"First of all, I would like to give a lecture on .

Marikka began her lecture with a review of golem control. As far as Jin could see from the reactions of the audience, most of them seemed to understand the level of the lecture.

"......It took too much time to update, or improve, the <>, which is the <>. Therefore, we are often forced to use somewhat outdated control systems.

"Marikka-sama's voice resonates well, doesn't it?"

"Yes, it does."

<

"I will tell you one of the ways to improve it. First of all, standardization of the Golem is a prerequisite.

It was obvious that a standardized golem could apply the same <>.

"Let's call the type <. The data required for <> is common, as you can see. So..."

Everyone listened closely to what Marikka had to say next.

"We are going to build a system to manage all the control data in one place and update it at will."

At this stage, more than half of them still did not fully understand.

"In other words, we are going to share data among all <>. I will explain the system for this purpose.

A voice arose from the audience.

This is one of the two pillars of this lecture (the other is the introduction of the <> golem).

In the world of Ars, where the Internet is not as widespread as it is today on Earth, the idea of sharing data was novel.

"...... and, in this way, data is managed at <>. You can imagine the enormous amount of data that would be gathered by having golems of the same type exchange data at regular intervals at the <>."

The movement data and control data of each Golem and automata are currently managed individually. In other words, they are dependent on the experience of each individual.

Sharing this data is synonymous with making them gain dozens or hundreds of times more experience.

Furthermore, if they are the same type, even a newborn golem can move as a warrior.

No, not only in combat. It is not only in combat, but also in the fields of housekeeping, medicine, and manufacturing.

Those who understood this applauded generously.

* * * * * * * * * *

After another 10-minute break, it was Jin's turn.

<>. Please join Dr. Jin Nido and his students, Freddy, Gulina, and Rubina.

I'm so nervous.

"Calm down, Rubina."

Jin patted Rubina on the head.

"Come on, let's go. Come ......,<>"

Jin, Reiko, Rubina, Gulina, Freddy, and <> stood on the podium, and there was applause.

At the same time,

"Hey, that's ......."

"Isn't that Freddy the dropout?"

"Yes, that's him.

"How did he become an apprentice of ?

"Why is he the apprentice of ? However, only those who were nearby, Reiko and Hope heard them.

"Now, let me talk about <>. First of all, as an example, this <> is a golem made by three of my students.

There was a gasp of surprise.

"This is the I explained a little earlier. ...... Freddy, Greena. Would you mind removing some of the exterior?

"Yes."

Jin instructed Freddy and the others to remove the entire exterior of his right arm.

"As you can see, the muscle tissue inside is made of magiresin.

This is Freddy. His explanation is a bit cryptic, but I guess it can't be helped.

Jin takes it over and explains further.

"I can't show you the skeleton, but you can see it on page 10 of the document.

Everyone hurriedly turned the pages.

"As you can see, it has a shape that might be more appropriate to call it a rather than a skeleton.

It is not unlike the skeleton of a scarecrow made of bamboo, so to speak.

"Since it is shaped like this, it can be made by <>. It would be a great labor-saver."

The lack of joints is a big advantage in manufacturing.

"Now, has anyone noticed the problems with this method? Let's go to ...... and we will answer those questions."

Jin looked around the room and saw that only about 10% of the participants had noticed the problem.

"You probably think that you can't get the power and speed you want from Magirezin, but you know that, don't you? But if you know that, you should analyze the cause and take countermeasures."

Once again, the audience was abuzz.

"This is a little bit off topic, but every event has a cause. And if we can find the cause, we can take countermeasures.

After these words, Jin took a pause to let the audience understand his meaning before continuing.

"First of all, we need to identify the joints by the skeleton. This will simplify the process of indicating <> to bend and increase the speed of the process.

The auditorium is abuzz.

"And then there's magnesia resin. The performance of this also varies depending on the region and the type of tree that produces it.

The auditorium was once again abuzz.

"Those of you who thought that there is no difference in the performance of any of the magi resins should reflect a little. You can easily double the performance.

Some in the audience turned their heads when Jin said this.

After explaining further improvements, Jin said,

"Well, if we use this method, it will be very troublesome to control. In other words, we cannot use almost all of the existing control parameters. This is where the suggested by Marikka comes in handy."

In the backstage, Marikka is saying,

"...... Jinshama calls me by <" she muttered in agony.

Marikka was in agony, muttering to herself.

After that, various explanations were given, and Rubina, Gulina, and Freddy were given short explanations as well, and the morning session was over.